Easy-Set Logic® Indoor/Outdoor Sprinkler Timer/Controller

Here, we’ll walk through the programming of your Easy Set Logic Timer. (If you have one of our B-hyve versions of this timer, please click below

If you prefer to watch a video, click "Video Guides" at the bottom.

Make sure your timer is connected to electricity. It will either be plugged directly into a live wall outlet or professionally wired.

Programming is achieved by rotating the dial counter-clockwise and lining up the desired section on the dial with the dash mark on the left.

Your sprinkler timer provides the flexibility of using 3 independent programs (A,B,C). A program is where you store all of your sprinkler settings. It consists of a group of stations set to specific start times and run times. Multiple programs allow you to run different valves on different days with different run times.

1. Set Clock

• Turn dial to [SET CLOCK]

• Press the [+/–] buttons to set the current time of day

• Press the arrow buttons to set am/pm

• Turn dial to accept time

2. Set Date

• Turn dial to [SET DATE]

• Y/M/D will appear (blinking letter indicates selection)

• Press the [+/–] buttons to set the correct year, then press [ENTER] or the arrow buttons

• Press the [+/–] buttons to set the correct month, then press [ENTER]

• Press the [+/–] buttons to set the correct date

• Turn dial to accept date

3. Start time

• Turn dial to [START TIME]

• Press the [+/–] buttons to select time you’d like your watering to begin

4. Run Time

• Turn the dial to [RUN TIME]

• Press the arrow buttons to select a station and press the [+/–] buttons to enter the watering duration for that station

• Press [ENTER] or the arrow buttons to move to the next station/valve, and enter watering duration for each station

5. How Often

• Turn the dial to [HOW OFTEN] – this screen allows you to set how often to water.

There are 3 options provided:

1. Days of the week (Mon, Tues, Wed, etc.)

2. Intervals (Every “X” number of days)

3. Odd or Even Days

Days of the Week

• Your dial should be set to [HOW OFTEN]

– Display will show the current program (A,B, or C)

– Press the arrow buttons to move from one day to another

– Press [+] or [ENTER] to select a day for watering. A frame will appear around the selected days.

• To delete a previously entered day, press [-] or [CLEAR]

Example: Monday, Wednesday, & Friday

Intervals

• Use the arrow buttons to move to the INTERVAL option “INT”

• Press [+/–] buttons to select the number of days between watering

Example: An interval of 1 will water every day; an interval of 3 will water every 3rd day, etc.

Odd or Even Days

• Use the arrow buttons to move to the ODD or EVEN day watering

– Press [+] or [ENTER]

• Selecting a different option or pressing clear will erase the previous selection

Example: Odd: 1st, 3rd, 5th, etc.

Example: Even: 2nd, 4th, 6th, etc.

Turn the dial to [AUTO] and that’s it! You have programmed your timer!

Turn dial to [AUTO] to activate your program