Skip to Content
B-hyve Smart Indoor/Outdoor Irrigation Controller1st Gen B-hyve indoor/outdoor controller not broadcasting the Orbit Network
B-hyve Smart Indoor/Outdoor Irrigation Controller
1st Gen B-hyve indoor/outdoor controller not broadcasting the Orbit Network
Make sure the timer is in pairing mode
The controller will go out of pairing mode after an hour, so it is very possible you just need to put it back into pairing mode!
To do that, rotate the dial to off, and then press and hold the Reset button for 10-12 seconds. The timer should now say “PAIR”.
An important reminder is to turn the device to the OFF position after the reset and once it is in pairing mode.
On this page