B-hyve Smart Indoor Irrigation Controller

Be aware, this step will reset all settings in the controller, you will lose all current programming. First I need you to open the bhyve app. Go to Settings > Devices> Your Controller> now select “Deauthorize Controller”. This will remove the controller from our server.

• Next, for this step you will need to be at the controller. At the controller, press the B-hyve button 5 times. The button will begin to flash red, and then go white. After a few seconds, you will see a flashing “P” indicating that the timer is in pairing mode.

• In your B-hyve app, select “This is a new device” and begin the pairing process over again. Click here for our pairing guide for a step-by-step process in getting the controller paired to your Wi-Fi network.