Skip to Content
Help Center

B-hyve Smart Hose Watering Timer

System turns on too frequently (non-programmable)

Try this solution

Follow the steps below

  • Adjust cycle period to the desired number of minutes. Remove the thermostat from the wall plate.

  • While holding down the reset button, press down the arrow (non-programmable) until the offset indicator appears. Release reset button.

  • Immediately press the reset button again. (Offset setting will not be lost).

  • Use up & down arrows to toggle between 6, 12, 20, and 60. 12, 20 & 60 used for heat pumps

  • Press the reset button again to select desired cycle period. Replace thermostat to wall mount.

  • Slide mode switch to heat or cool & wait 10 seconds.

Need more help?

Ask a different questionB-hyve Smart Hose Watering Timer
Select a different product
On this page